Hobbywing QuicRun 10BL120 Sensored ESC 2-3S Car

Hobbywing QuicRun 10BL120 Sensored ESC 2-3S Car

• Efficient Cooling System
  Hobbywing patented heat-conductive copper bar cover on the power board of the QUICRUN 10BL120-SD, which can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum heat sink housing, combined with high-performance cooling fan can keep your ESC as cool as possible.

  Single-button Programming & Factory Reset
  The SET button on the ESC allows the user to easily program or factory reset the ESC with ease.

  Wide Applicability
  This ESC is designed for practice and daily training of1/10^th, 1/12^th scale touring cars, buggies, and F1.

  Specifications

  • Scale: 1/10^th
  • Type: Brushless Sensored
  • Waterproof: No
  • Cont./Peak Current: 120A/760A
  • Input: 2-3S LiPo/5-9 Cells NiMH
  • BEC Output: Linear Mode: 6V/3A

  Wires & Connectors

  • Input Wires: 12AWG-200mm
  • Output Wires: 12AWG-200mm
  • Input Connectors: No
  • Output Connecotors: No

  Fan

  • Size: 25 x 25 x 10 mm
  • Voltage Range: 5-8.4V
  • Powered by: Powered by the battery

  ESC Programing via

  • SET Button on ESC: Supported
  • LED Program Box: Supported
  • LCD Program Box: Not Supported
  • WiFi Module: Not Supported
  • Program Port: Program/Throttle Wire

  Firmware

  • Firmware Upgrade: Not Supported

  Size & Weight

  • Size: 33 x 28 x 31.5mm (w/ Fan)
  • Weight: 105g (with wires)

  Applications

  • Motors: Sensorless Brushless & Sensored Brushless
  • Vehicles: 1/10^th Touring Cars/Buggies/Drift Cars/F1

  KV Rating/T Count:

  • 2S LiPo: 1/10^th Touring Cars≥4.5T & 1/10^th Buggies≥5.5T
  • 3S LiPo: 1/10^th Touring Cars≥10.5T & 1/10 Buggies≥13.5T
    (3650 Motors)

  

  

  Sensored motor wiring
  When using sensored brushless motor, please connect the “SENSOR” port of the ESC and the the “SENSOR” port of the motor with a sensor wire. For sensored brushless motor, the #A, #B, #C wires of the ESC MUST be connected with the motor wire #A, #B, #C respectively. Do not change the wires sequence optionally! (#A is Blue, #B is Yellow, #C is Orange.)

  Sensorless motor wiring
  When using sensorless brushless motor, the #A, #B, #C wires of the ESC can be connected with the motor wires freely (without any order). If the motor runs in the opposite direction, please swap any two wire connections. Please disconnect the battery from the ESC after running the car!
• SPECIFICATIONS
• PARTS
• POPULAR ACCESSORIES
• DOWNLOADS