Features
- Industry’s First IP67-Rated Waterproof Case
- Strong Three-Pole Ferrite Motor
- Metal Gear Train with MP First Gear
- Dual Ball Bearing-Supported Output Shaft
- 7.4v 2-Cell LiPo Capability
- Standard Programmable Digital Circuitry
Programmable Functions
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Data Save / Load
- Program Reset
Accessories
- Steel Gear Set | Must be serviced by Hitec Service Dept |
- Metal / Plastic 1st Gear Set | Must be serviced by Hitec Service Dept |
- Plastic / Aluminum Case Set | Must be serviced by Hitec Service Dept |
- Applicable Horns
D646WP Servo Specifications
| Performance Specifications | |
| Operating Voltage Range (Volts DC) | 6.0V ~ 7.4V |
| Speed (Second @ 60°) | 0.20 ~ 0.18 |
| Maximum Torque Range oz. / in. | 157 ~ 179 |
| Maximum Torque Range kg. / cm. | 11.3 ~ 12.9 |
| Current Draw at Idle | 4.5 mA |
| No Load Operating Current Draw | 330 mA |
| Stall Current Draw | 2,100 mA |
| Dead Band Width | 4 µs |
| Physical Specifications | |
| Dimensions (Inches) | 1.65 x 0.83 x 1.57 |
| Dimensions (Metric) | 41.8 x 21.0 x 40.0 |
| Weight (Ounces) | 2.15 |
| Weight (Gram) | 61.0 |
| Circuit Type | G1 Programable Digital |
| Motor Type | 3 Pole Metal Brush Ferrite |
| Gear Material | Metal |
| Bearing Type | Dual Ball Bearing |
| Output Shaft (type / Ømm) | Standard 24 |
| Case Material | Plastic |
| Dust / Water Resistance | IP 67 |
| Connector Gauge (AWG) / Strand Count | 22 / 60 |
Omtaler
There are no reviews yet