Traxxas Heat sink (fits #3351R and #3461 motors) 3458

The 3458 heat sink fits Velineon brushless motors #3351R and #3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on installing the heatsink and fan shroud, read the following article.

kr 129.00

Traxxas Suspension arm set 7131

Suspension arm set, front (includes upper right & left and lower right & left arms)

kr 99.00

Traxxas Pivotballs & Caps 4stk 1/16 7033

Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Summit

Bestillingsvare 2-5 dager

Traxxas Cooling fan kit (with shroud) 3456

Cooling fan kit (with shroud) (fits #3351R and #3461 motors) (requires #3458 heat sink to mount)

kr 299.00

Traxxas Drivaksel Foran 6851A

Drivakselmontering foran, ekstrem tung belastning (1) (venstre eller høyre) (ferdig montert, klar til montering) / skruetapp (1)

kr 151.00

NYHET

Traxxas Bearing Adapter Alu Blue with Ball Bearing 10x15x4mm 6893X

Bearing adapter, 6160-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (blue rubber sealed) (1) (for slipper shaft)

Upgrade your slipper shaft with this tough 6160-T6 aluminum adapter. Perfect for high-power applications, the aluminum bearing adapter tolerates a wide heat range to keep you on the throttle longer for more intense action. Includes blue rubber sealed bearing.

kr 69.00

NYHET

Traxxas Slipper clutch complete 6878

Replacement part for these models: Rustler® 4X4 Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 […]

kr 230.00

NYHET

Traxxas Bumper Front Rustler 4x4 6736

Replacement part for these models: Rustler® 4X4 VXL Rustler® 4X4

kr 74.00

NYHET

Traxxas Bumper Rear Rustler 4x4 6737

Replacement part for these models: Rustler® 4X4 VXL Rustler® 4X4

kr 90.00

NYHET

Traxxas Shock Tower Rear Rustler/Hoss 4x4 6738

Replacement part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4

kr 76.00

NYHET

Traxxas Turnbuckles camber link 39mm (69mm center to center) 3644

Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)

Replace your non-adjustable camber links with these versatile metal turnbuckles that allow trackside camber adjustment.

kr 90.00

NYHET

Traxxas Turnbuckles camber link 49mm (82mm center to center) 3643

Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)

Replace your non-adjustable camber links with these versatile metal turnbuckles that allow trackside camber adjustment.

kr 94.00

NYHET

Traxxas Bulkhead front (for use only with #6723R chassis) 7430R

Replacement part for these models: Rustler® 4X4 VXL Rustler® 4X4

kr 76.00

NYHET

Traxxas Bulkhead Rear 7429

Replacement part for these models: Ford® Fiesta® ST Rally Rustler® 4X4 VXL Rustler® 4X4 Slash […]

kr 75.00

NYHET

Traxxas Driveshaft assembly front heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) 6851X

The Traxxas heavy-duty driveshaft comes pre-assembled and ready to install. It's a step up from standard driveshafts with improved performance and durability. For higher-power applications, Traxxas Extreme HD and steel CV driveshafts provide the ultimate level of performance.

kr 119.00

NYHET

Traxxas Sway bar kit (front and rear) (includes front and rear sway bars and adjustable linkage) 6898

Fine-tune your model for high-grip racing with this track-tested sway bar set. Sway bars reduce chassis roll and increase corner speed on high-traction surfaces—perfect for hard-packed tracks and pavement running. The bar thicknesses are precisely tuned, and install in minutes without disassembly. All hardware and instructions are included.

kr 279.00

Traxxas Spring shock white GTR xx-long 1.004 rate blue 1 pair 7449

Accessory part for these models: Rustler® 4X4 Slash 4X4 VXL Slash 4X4 Stampede® 4X4 Unassembled […]

kr 59.00

Traxxas Spring shock white GTR long 0.892 rate blue 1 pair 7448

Accessory part for these models: Rustler® 4X4 Slash 4X4 VXL Slash 4X4 Stampede® 4X4 Unassembled […]

Bestillingsvare 2-5 dager

Traxxas SHOCK TOWER FRONT 6839

SHOCK TOWER, FRONT

kr 70.00

Traxxas Nerf bars chassis black 5823

Replacement part for these models: Drag Slash Ford® F-150 Raptor Slash 2WD Unassembled Kit Slash […]

Bestillingsvare 2-5 dager

Traxxas Spring shock white GTR xx-long 0.711 rate orange 1 pair 7442

Accessory part for these models: Rustler® 4X4 Slash 4X4 VXL Slash 4X4 Stampede® 4X4 Unassembled […]

kr 59.00

Traxxas Housings differential rear 6880

Replacement part for these models: Ford® Fiesta® ST Rally Hoss® 4X4 VXL Rustler® 4X4 VXL […]

kr 54.00

Traxxas Housings differential front 6881

Replacement part for these models: Ford® Fiesta® ST Rally Hoss® 4X4 VXL Rustler® 4X4 VXL […]

kr 54.00

Traxxas Main Chassis (Long Battery) Rustler 4x4 6723R

Chassis (162mm long battery compartment) (fits flat style battery packs) (use only with #7430R front bulkhead & #6726X battery hold-down)

kr 234.00

Traxxas Conversion Kit Chassis LCG Slash 4x4 7421

Slash 4X4 Low-CG (Low Center of Gravity) Conversion Kit Performance-proven by the Slash 4X4 Ultimate and 1/10 Rally, the Traxxas Low-CG chassis is now available as a complete conversion kit for Slash 4X4. No matter where you want to race, on the track or off, you will experience superior handling and faster corner speed. The conversion kit includes all the parts and hardware required to convert one Slash 4X4 to the Low-CG configuration.

Bestillingsvare 2-5 dager

Traxxas Gear 15-T pinion (32-p) heavy duty (machined hardened steel)/ set screw 3945X

Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

kr 89.00

Traxxas Gear 13-T pinion (32-p) heavy duty (machined hardened steel)/ set screw 3943X

Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

kr 89.00

Traxxas Gear 12-T pinion (32-p) heavy duty (machined hardened steel)/ set screw 3942X

Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

kr 89.00